Replacing Rubber Grippers on an Omnibot 5402 with new parts from Daboo Designs

Replacing Rubber Grippers on Omnibot 5402

 

Get your new grippers here!

We know how challenging it can be to replace parts on your Omnibot robot, so put this video together to walk you through the process.

You'll only need a Philips head screwdriver and some patience to perform this task. The entire process has a few gotchas that we'll call out as we walk through it in the video. It should take 20 - 25 minutes to complete the replacement.

The rubber gripper changing process is similar for the following robots:
TOMY Omnibot (Model No. 5402), TOMY Hearoid (Stock No. 2010) and, Radio Shack Robie Sr. (Catalog No. 60-2398)


Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.